Regular Shape Brown Fused Aluminum Oxide PH Neutral 7.0 - Reliable

Brown corundum was used as sandblasting surface treatment, because of its relatively high density, so that is less dust in the process of sandblasting. This ensures operator health and safety, at the same time it can improve operator visibility. (Compared with slag: in the formation process of slag, cold water or even seawater is used for high temperature cooling, so it form the glass phase structure, with breakability. Because slag is relatively brittle, in the process of grinding, easy to be smashed into small particles. Because the slag is relatively brittle, it is easy to be crushed into small particles in the process of sandblasting. Because the density of slag is relatively small, which results in small slag particles suspended in the air and environmental pollution. Similarly, quartz sand is a very fragile abrasive.)

Brown corundum, under a certain pressure, can quickly impact the surface of the object with a large number of sharp edges, so it is regarded as a very fast spray grinding method. The acceleration and velocity of particles in the air flow are a function of inertance and particle size. The smaller the particle, the easier it is to accelerate and thus produce a higher impact force on the surface of the object, so that resulting in a very high cleaning rate, usually twice as fast as other conventional abrasives.The unique particle size of brown corundum ensures that more effective particles can hit the surface of the object, so the use of brown corundum can greatly reduce the loss of abrasive.

In the process of sandblasting, brown corundum can penetrate deep into the holes and pits on the surface and reach the bare surface of the metal, so it can completely remove all rust, water-soluble salts and other pollutants. The treated metal surface is very clean and free of embeddings, and the quality is easily up to standard grade. Relatively speaking, such as copper slag and nickel slag, the coarse sharp edges and corners of slag are easy to remain on the surface of steel after sandblasting, which leads to the failure of the initial coating and poor coating effect.

Technical Parameters:

Aluminum oxide (Al2O3) exists in solid/crystalline state with a brown color. It has a hardness rated 9 on the Mohs scale and it melts at 2045°C (3723°F) and starts to boil at ~2980°C (5400°F). Additionally, its density is 3.9 g/cm³ and its refractive index is 1.76. The specific heat capacity of aluminum oxide is 0.88 J/gK and the thermal conductivity ranges from 30.0-35.0 W/mK at room temperature. The Mohs scale of mineral hardness is 9 and its bulk density is 1.57-1.65 g/cm³. Aluminum oxide has a regular and sharp edged grain shape, and it is non-magnetic, with a Mohs hardness scale of abrasives of 9. It has a trigonal hexagonal crystal structure, with particle size ranging from 12-1200 micro-meters (μm). It also has a chemical composition of Al2O3 (95%+), SiO2 (<1.5%), and MgO (<1.4%), with typically below 0.11% free iron content. Aluminum oxide has a refractoriness above 1900°C, and a neutral pH level (7.0). It is soluble in hydrofluoric acid and sulfuric acid, is highly flame resistant, and is an insulator (non-conductive) in terms of electrical conductivity. Its water-soluble salts content is <0.3%, and it cleans without polluting. Aluminum oxide has a coefficient of thermal expansion of 8x10-6/°C and it is mechanically strong, highly chemical stable, and resistant to thermal shock. Lastly, it has a high strength.

Applications:

Wire sawing: Brown corundum is used as an abrasive in wire sawing operations for cutting complex shapes in a wide range of materials.

Precision casting: It is used in precision casting, which is the process of producing high accuracy components for the aerospace, automotive, and medical industries.

Lining materials: It is used in lining materials for furnaces and kilns due to its excellent resistance to high temperatures.

Grinding paste: Brown corundum is used in grinding pastes for various applications such as optical lens grinding, tool manufacturing, and polishing.

Ultrasonic grinding: It is used in ultrasonic grinding, which is a non-contact machining process that is commonly used in surface finishing and material removal operations.

Diamond grinding wheel binding agent: Brown corundum is used as a binding agent in diamond grinding wheels, which are typically used in high-precision grinding operations.

Metal surface treatment: It is used in metal surface treatment, including cleaning, degreasing, and polishing.

Stone materials cutting: Brown corundum is used in the production of cutting discs used to cut stone and concrete.

Customization:

Brand Name: Fine-tech
Model Number: F22
Place of Origin: Changsha China
Certification: ISO9001
Minimum Order Quantity: 500KG
Price: Negotation
Packaging Details: 25kg/barrel, 25kg/bag, 1t/pallet
Delivery Time: 5-15 work days
Payment Terms: L/C, T/T
Supply Ability: 2000t per year

Product Feature:
Al2O3: ≥95%
Refractoriness: Above 1900°C
Melting Point: 2072°C
Crystal Structure: Trigonal Hexagonal
Density: 3.97 G/cm3

Support and Services:

Brown Aluminum Oxide offers technical support and services to ensure customers get the most out of their product. Our technical support team is available to answer questions, provide troubleshooting assistance, and offer advice about product use and maintenance. We also provide on-site maintenance services and repairs for our products. Our service staff is highly trained and experienced in working with Brown Aluminum Oxide products, and they are committed to helping you get the most out of your purchase.