White Zirconium Ceramic Beads With Acid Resistance 1000-1300Mpa Compressive Strength

Product Description:

White Zirconium Ceramic Beads With Acid Resistance And Compressive Strength Of 1000-1300Mpa

Zirconia (ZrO2) microbeads benefits from their high level of strength, toughness, density, and hardness - adding to their credentials of excellent wear resistance and corrosion resistance, gaining them popularity within the grinding field.

Because of the high level of density, uniform size, sphericity, strength, and hardness, these microbeads have a toughness that is up to five to ten times that of a standard glass. Addition to that, they are easy to clean and can be repeatedly used in industrial production.

Features:

95 Zirconium beads consist of 94-95% zirconia, which is much higher than the average. With its high-level wear resistance and excellent liquidity, these beads can offer good product roundness and smooth surfaces, which could also lower wear resistance instruments' requirements.

TZP zirconia beads also contain about 95% zirconium, plus about 4.8% yttrium, making their specific gravity 1.6 times denser than normal zirconia beads. These beads can then result in higher grinding efficiency under the same conditions.

Moreover, TZP zirconia ceramic microbeads has great impact resistance and low wear. They are tough enough to endure high-speed machine concentration without cracking or peeling, while incurring approximately only 1/2 of zirconia silicate beads' wear. Due to their extremely low wear (ppm), the beads can prevent pollution of materials.

Technical Parameters:

True density of diamond is 6.05kg/dm³, and the bulk density of diamond is 3.75kg/dm³. Its Moh's hardness is 9, which is the highest of any mineral. Moreover, its compression strength is between 1000MPa-1300MPa, with an abrasion rate of 0.01kg/h.m.

Applications:

Zirconia balls are commonly used for grinding media, and have good hardness for grinding high hardness materials such as alumina, aluminum, glass, quartz, feldspar, and glaze. They also maintain high toughness and can be used for abrasive mill, stirring mill and other high speed equipment. In addition, they are popularly used for paint graphite coatings and food and drug grade raw materials grinding.

In addition, its wear-resistance makes it suitable for wear-resistant coatings. Normally, the models of wear-resistant ceramic balls range from 0.5mm to 3mm.

Packing and Shipping:

Zirconia Grinding Media is packaged in 25 kg boxes, with a maximum of four 25 kg boxes per pallet. The boxes are secured with stretch film and each pallet is also secured with stretch film. The pallets are then loaded onto a truck for shipping.

FAQ: