Maximum Operating Temperature 1700°F Ceramic Blasting Media

Product Description:

Ceramic Beads blasting media are high-tech blasting media which are made by high quality zirconia powder as raw material, then fused in an electric furnace under high temperature over 2000 degrees, finally made into different micro beads through special technology. It has smooth surface, good elasticity, and high hardness, and won't pollute the workpieces like steel shot or grit, and it can even be recycled many times. It can efficiently be used in both dry or wet blasting equipment.

Ceramic beads, also known as ceramic media, ceramic bead blasting media, or ceramic blasting beads, are mainly used for blast cleaning, deburring, removing oxice layers of castings and forging parts, also for metal surface finishing and pretreatment before coating and plating. The main component of ceramic shot is zirconia, which is mainly used for surface treatment such as sand blasting and shot peening.

These ceramic beads are widely used for sandblasting and surface treatment of aviation parts, stainless steel plates, structural parts, stainless steel kitchenware, medical devices, mobile phone/laptop shell, automobile chassis/engine, sports equipment and other industries. With its high gloss and impact strength, ceramic blasting beads can achieve a better surface brightness during sandblasting, while the workpiece itself does not change color.

Features:

High strength and wear resistance are the main characteristics of ceramic shots. The main component of ceramic shot is zirconia, which is characterized by small crystal size and high wear resistance. With Vickers hardness of 700hv and Rockwell hardness of 600hrc, the density and specific gravity are also much higher than those of glass beads.

Ceramic shot has many advantages in sand blasting. Unlike metal shot, it will not generate metal residue when used with metal parts, and it will not affect the color of the workpiece. The sandblasting effect is excellent, the surface finish is high, and the wear is small. It is not easy to be broken during sand blasting, it does not generate dust, and its recycling times can reach 25 times of glass beads.

In addition, ceramic shots are environmentally friendly, with low dust emission, so it is safe and does not contaminate the workpiece surface. It also possesses strong chemical resistance, which guarantees constant performance. All in all, ceramic shot is suitable for dry spraying and wet spraying on various metals and non-metals, and its costs are much lower than traditional shot peening.

Technical Parameters:

Applications:

High strength and wear resistance. The main component of ceramic shot is zirconia, which is characterized by small crystal size and high wear resistance. Ceramic shot has high hardness, with Vickers hardness (microhardness) of 700hv and Rockwell hardness of 600hrc. The density and specific gravity are also much higher than those of glass beads.

No dust, high abrasion resistance and strength make it difficult for ceramic shot to be broken during sand blasting, so it is not easy to generate dust. Sandblasting effect: the surface finish is high. Using ceramic shot sandblasting can achieve smooth satin surface brightness. Using ceramic shot of the same specification is 60-70% lower than that of glass bead sandblasting.

It is applicable to various metals and nonmetals, such as titanium alloy, magnesium alloy, aluminum alloy, stainless steel, carbon steel, brass and alloy, acrylic, plastic and other materials. Ceramic shot will not react or oxidize with metal, and there is no metal residue, so it will not affect the color of the workpiece.

It is suitable for dry blasting and wet blasting. The surface of ceramic shot is very smooth, and the wear of sand blasting equipment is very small. Ceramic shot has high sandblasting efficiency and long service life, and its recycling times can reach 25 times of glass beads. The roundness is high, and the proportion of abnormal balls and snowman balls adhered between the spheres is low.

Strong chemical resistance: Guarantees constant performance eg. consistent Surface blasting effect. Low dust emission: Does not contaminate the work piece surface, and no hidden danger of silicosis, it is harmless to the human body. Not easy to break: Recyclable,and can reduce the refueling times, improve working efficiency. Low wear: Can protect the equipment,lengthen the service life.

Customization:

• Brand Name: Fine-tech
• Model Number: z210
• Place of Origin: Changshan China
• Certification: ISO9001
• Minimum Order Quantity: 500KG
• Price: Negotation
• Packaging Details: 25kg/barrel,25kg/bag,1t/pallet
• Delivery Time: 5-15work days
• Payment Terms: L/C,T/T
• Supply Ability: 2000t per year
• Service life: Long
• Equipment wear: Low
• Hardness: 7.5-8.5
• Shape: Irregular
• Material: Ceramic
• Keywords: silicon carbide ceramic parts, Ceramic Blasting Media, Ceramic Bead Blasting, Ceramic Blasting Media

Support and Services:

Ceramic Blasting Media provides technical support and service to its customers through various means. For detailed technical questions, customers can contact our technical support team via email or telephone. Our technical support team is available 24 hours a day, seven days a week.

For more general questions, our customer service team is available Monday through Friday from 8:00am to 5:00pm PST. They can answer questions about product features, pricing and ordering information. For any other inquiries, customers can fill out an online form and receive a response within 24 hours.

We also provide a comprehensive library of product manuals and technical documents on our website. Customers can access these documents to help answer their questions or troubleshoot any issues they may have.