Ceramic Blasting Abrasive Providing High Chemical Resistance Properties

Product Description:

Due to the cristobalite and quartz which has been processedin high temperature,the beads have excellent performance such as low wear rate and high impact strength. These features make them suitable for surface polishing and deburring operations, like Sand Blasting process, on steel, aluminum alloys and other non-ferrous metals.Ceramic beads can be also used to clean molds, engine parts, valve bodies, turbine blades and a variety of parts produced by industrialprojects. Because of its high degree of durability and efficiency,it can provide a rich, uniform surface profile with a matte finish.

These ceramic beads blasting media can be widely used in automotive, aerospace,electronics, home appliances, sporting goods and construction industriesto achieve outstanding surface finish of the parts. Additionally,the extremely low dust content of them guarantee excellent performanceand meet the safety and environmental requirements.

Features:

Because of the spherical and smooth surface of ceramic sand which does not damage the workpiece.With the help of good elasticity, ceramic sand can bounce back from multiple angles in the process of sandblasting, which is very suitable for (metal, plastic) structure complex workpiece, at the same time it has the effect of eliminating stress, improve the service life of the workpiece.

The breakage rate ceramic sand is low, which can effectively reduce the number of reloading, reduce the cost of materials and workers, so the relative use cost is low and it is cost-effective. Compared with the glass sand, the surface finish is higher and the service life is improved by about 20-30 times. Producing less dust, the working environment is cleaner and environmentally friendly, no potential silicosis, which is beneficial to the health of employees.

The size distribution of ceramic sand is uniform, and it has no porosity , high toughness, hardness, and impact resistance. High particle density can achieve the sandblasting strength of glass beads at a faster grinding speed. The elastic modulus of ceramic projectile is 330GPa, much higher than that of glass bead 60GPa, and the impact energy is large. To achieve the same shot peening effect in use can reduce the shot peening pressure, high shot peening efficiency, reduce energy consumption, thus reducing production costs.

Good stability, corrosion resistance to all kinds of chemical liquids, high temperature resistance, small coefficient of thermal expansion, high insulation.These properties make it possible to use ceramic sand in special industries with high temperature, strong acid and alkali environment.

Applications:

Sandblasting with ceramic beads can generate compressive stress on the surface of the substrate, remove surface oxides and distortion of part of the surface metal. This method produces a clean, rough and highly active surface, which is an essential preprocessing step. The quality of the pretreated surface affects the adhesion, appearance, moisture resistance and corrosion resistance of the coating, and if done poorly, rust may continue to spread underneath the coating, causing it to peel off.

Ceramic shots have a wide range of uses in different industries. In the field of electronic equipment, they are used to sandblast the shells of mobile phones, tablets and watches made from aluminum alloy or stainless steel, allowing adjustment of its roughness and gloss with anti-fingerprint characteristics.

It can also be used in kitchen utensils, to give high-quality stainless steel cookware, pot bottoms, soup spoons, and other products, a delicate metal texture and certain antibacterial ability. In the glass products industry, ceramic shots can replace the hydrofluoric acid chemical etching process to prevent pollution through atomization treatment.

The shot peening process is used to improve the fatigue resistance and eliminate surface stress from carbon steel, titanium alloy, aluminum alloy, and other aviation mechanical parts. It can also be used for surface reinforcement on aircraft wings, aeroengine turbine blades, turbine discs, gears and landing gear.

Customization:

Fine-tech offers custom-made ceramic blasting abrasive service. Our ceramic blasting abrasive is designed to provide superior performance and long-lasting durability. It's suitable for all sandblasting booths equipment, media blasting booth, sandblast recovery system and other applications.

• Brand Name: Fine-tech
• Model Number: B205
• Place of Origin: Changsha China
• Certification: ISO9001
• Minimum Order Quantity: 500KG
• Price: Negotiation
• Packaging Details: 25kg/barrel, 25kg/bag, 1t/pallet
• Delivery Time: 5-15 work days
• Payment Terms: L/C, T/T
• Supply Ability: 2000t per year
• Dust Production: Low
• Chemical Resistance: High
• Hardness: High
• Material: Ceramic
• Heat Resistance: High

Support and Services:

We provide technical support and service for our Ceramic Blasting Abrasive (CBA) products. Our team of experienced and knowledgeable professionals are available to answer any questions or concerns you may have about our products.

We provide on-site training and guidance in the use of our CBA products, and our technicians are available to help troubleshoot any issues you may have. We also offer product demonstrations to help you get the most out of your CBA purchases.

Additionally, our team is available to assist with repair and maintenance of your CBA products, and we offer a wide range of spare parts and consumables to keep your system running smoothly.

For more information about our Ceramic Blasting Abrasive Technical Support and Service, please contact us today.

FAQ: